Home and Garden

Refine Search

What is the average cost of a detached garage?

More elaborate garages that have storage space and room for more than one car are in the $30,000 range or more. The square-footage price is also higher if the materials are of higher quality, with an average of $55 per square foot for high-end materials. A dream two-car garage with upgraded features may cost $47,000 or more to build.

Continue Reading

What are some electrical panel codes?

When working on a panel that is connected to a delta-connected high-leg system, replace the high-leg conductor in its original location once the work is complete. This avoids accidentally connecting 120-volt circuits to the high leg.\nThe code also states that all circuits and modifications on a panel should be clearly marked. Spare positions should be identified as such, and all identifications for a panel should be listed in a directory inside the door or on the panel board's face.\nCodes for general rooms in houses include requirements that wall receptacles are placed every 12 feet, an..

Continue Reading

What are the best-rated bed pillows?

Made of 230-thread count cotton, the Premier is a down-alternative pillow filled with supportive hypoallergenic clusters and is suitable for different sleeping styles. The Beans72 is filled with 100 percent organic buckwheat hull with a cotton casing and provides support and adjustability for side and back sleepers. Suitable for back sleepers, the Simmons Beautyrest contains natural latex foam and features a unique pin-hole design for air circulation. The pillow is resistant to bacteria and ideal for people with allergies.

Continue Reading

Where can I find a four-prong dryer cord?

When changing a dryer cord, disconnect the existing cord from the outlet before attempting to change cords, use insulated hand tools and position the dryer so there is adequate light and full access to the back panel. As of 2014, all homes built after 2000 are required to contain four-prong appliance outlets to comply with National Electrical Code requirements.

Continue Reading

How do you replace missing or broken fire bricks?

If you are replacing fire bricks on the inside of a fireplace or in another location with bad lighting, use a shop light to illuminate the area. To conduct a thorough repair, examine the entire firebox to find other broken or loose firebrick, as well as loose, crumbling or missing mortar. Use a stiff-bristled brush or cleaner on the surfaces to find all the damaged spots. Once you find all the spots you need to repair and take out the bricks, clean out the surrounding areas using a stone chisel and stiff-bristled brush. If there are spots where mortar is crumbling, clean them out to be 3/4 inc..

Continue Reading

How do you clean a furnace flame sensor?

Start by gathering a screwdriver and an emery cloth. To avoid electric shock, switch off the breaker that serves the furnace at the main power panel before attempting any cleaning. Next, locate the flame sensor usually found towards the rear end of the furnace, then locate the rod in the path of the burner. Using a screwdriver, loosen and remove the sheet metal screws that secure the sensor in place to detach the sensor box from its bracket. If the sensor is irremovable, you should clean it while it is in its position.\nClean the sensor by gently scrubbing its surface with an emery cloth to el..

Continue Reading

What are some facts about the Norwegian spruce?

Like all types of spruce, the Norwegian spruce is an evergreen that has needles instead of broad leaves. It is considered a fast-growing tree and does best in full sunlight, though it is not particular about the type of soil. In the United States, it thrives in hardiness zones 3 to 7.\nThe wood of the spruce is called whitewood or deal and is used in home decor, roofing and pulp for papermaking. The tree is also an excellent source of turpentine, and the wood is used for musical instruments. The shoots are also used for medicinal purposes.\nThe tree flowers in May, and the long, oval cones mat..

Continue Reading

How do you replace the water inlet valve on a KitchenAid Superba refrigerator?

Start by purchasing a new water inlet valve from a hardware store or the KitchenAid parts store, and unplug the refrigerator after turning the switch inside to the off position. Pull the appliance away from the wall, and follow the water supply hose from the wall to the inlet valve. Turn the water supply valve to the off position before unfastening the screw that secures the back panel in place. Remove both the back panel and the access panel, and carefully remove the water hose from the valve.\nUnfasten the flare nut on the valve's bracket to remove the device. Take the wires from the te..

Continue Reading

What is a spill mat?

Large spill mats are suitable for covering the floors of entire rooms and hallways. There are also specialized mats for use during refuelling or vehicle maintenance. Spill mats also serve to protect the surfaces of furniture at risk of damage by liquids, such as a surface under an aquarium or a bar counter. Parents may use a spill mat to keep their children from soiling their playing surfaces.

Continue Reading

What could cause low water pressure?

Several things can be done to correct low water pressure problem. Replacing defective pressure regulators, for example, sometimes increases the system water pressure. A number of water valves control the supply of water in a structure, so the main valve should be completely turned on to ensure that the pressure is not affected. Regularly check pipes for cracks and replace leaking sections to keep water from being lost en route to the tap.

Continue Reading
Showing 121 to 130 of 10000 (1000 Pages)