Home and Garden

Refine Search

How do you wire a three-pin plug?

A three-pin plug consists of three pins, and each pin must be correctly connected to the three wires in the electrical cable. For easy identification, each wire has its own specified color. The brown wire is live. This is connected to a fuse on the live pin. The electrical current uses the live wire as its route in. The blue wire is neutral. This is the route the electric current takes when it exits an appliance; for this reason, the neutral wire has a voltage close to zero. The green and yellow wire is earth and is connected to the earth pin. This is used when the appliance has a metal casing..

Continue Reading

How do I clean the inside of a coffee percolator?

Empty the coffee percolatorRemove any water, coffee or coffee grounds from the coffee maker. Be sure to empty both the carafe and reservoir. Rinse out the carafe with hot water.Use white vinegarFill the carafe halfway with white vinegar and halfway with distilled water. Pour the mixture into the reservoir. Run a cycleTurn on the coffee maker, and run a regular brew cycle with the vinegar and distilled water solution. When the cycle is complete, allow the solution to sit in the carafe for at least 15 minutes. Remove the vinegarPour out the vinegar solution, and fill the reservoir with distilled..

Continue Reading

Where are the costs associated with installing a home air conditioning system?

The type of air conditioner chosen for installation determines the installation cost. For example, a window air conditioner is cheaper to install than a central air conditioner. However, the window conditioners are less powerful than the central ones and are more effective in small rooms. Typically, the larger the room, the higher the cost of installing a conditioner.\nSome air conditioning technicians charge extra costs for protecting the existing structures during the installation process, including components, finishes and materials. Labor costs account for the larger percentage of the tota..

Continue Reading

Where can True freezer parts be purchased?

Consumers can turn to Grainger for high-quality replacement parts to keep True freezers operating normally, and the company makes reordering parts at regular intervals easy for professional installers and handymen. Grainger shoppers benefit from the ability to order online, over the phone using a toll-free number or on smartphones with apps designed for Android or iOS. The company also provides repair and replacement coverage for many parts sold online.\nAmazon.com sells both new and used True freezer parts in its online marketplace, and Amazon.com shoppers can learn more about products and ga..

Continue Reading

Why do oleander leaves turn yellow?

Leaf scorch is characterized by yellowing that starts at the tip of the leaf and works toward the branch. The bacteria that causes leaf scorch blocks the transportation of water and nutrients from the roots of the oleander to the leaves. Only some leaves are affected because the blockage is not uniform. Leaf scorch mimics the symptoms of drought. However, when an oleander experiences a drought, all of the leaves turn yellow.

Continue Reading

How do you get sticker residue off?

Mix the solutionMix a small amount of dishwashing liquid with equal parts of vinegar and warm water. Test the solution on an inconspicuous spot to ensure it does not discolor or otherwise harm the finish. Vinegar is safe for most plastic, glass and wooden surfaces. Use a paper towel to apply the solution to the residue. Soak the residueSoak a paper towel in the solution, and leave it damp. Spread the paper towel across the residue, and allow it to sit for five minutes. If you cannot move the object from a sunny location and the paper towel is drying, rewet it to complete the five-minute soak.R..

Continue Reading

How does a convection oven work?

Traditional radiant ovens cook by surrounding food with heat produced by a flame or heating element. Moving the air inside a convection oven increases the rate of heat transfer from the air to the food. The faster heat transfer increases the browning for meats and creates crisp pastries.\nCooking with a convection oven require adjusting recipes. The cook has the option of reducing the cooking temperature by 25 degrees and maintaining the same cooking time as with a radiant oven, or cooking at the temperature setting the recipe recommends and reducing cooking time by approximately 25 percent.\n..

Continue Reading

How do you wash white canvas shoes?

Scrub stains with a toothbrushUsing a toothbrush, scrub loose dirt and stains off the shoes. Persistent stains may require use of stain remover, which should be tested on an inconspicuous corner of the fabric.Clean the solesMake a paste of one part baking soda to one part water. Use the toothbrush to scrub the soles clean with this paste.Wash the shoesStart a gentle cycle in the washing machine, adding half the normal amount of gentle detergent when the machine is half full. Add the shoes when the machine is about three-fourths full. Air-dry the shoesAfter washing, let the shoes sit in a sunny..

Continue Reading

How do you remove poster putty stains from walls?

In the event that rubber cement does not remove all of it, use steam to loosen the adhesive further using a combination of water and heat. This can be achieved by plugging a clothes iron into an outlet, and then rest the iron with the hot side facing the adhesive stain. Allow the heat and steam to permeate the area for 5 minutes. Once the area is sufficiently warm, use a hot, damp paper towel to rub the area in a circular motion, similarly to the first technique. A combination of heat, dampness and friction should remove any remnants of the poster putty stain from the wall.\nIf the adhesive do..

Continue Reading

What are some tips for hanging heavy objects on plaster walls?

Unpointed molly bolts require drilling a hole the same diameter as the unexpanded barrel of the bolt. These anchors are a better choice for lath and plaster walls than pointed molly bolts, which eliminate the need for drilling but are for use with drywall. Push the molly bolt into the hole and tap the screwhead to seat the flange. Once it is flushed with the wall, use a screwdriver to tighten the screw, causing the metal barrel to expand behind the plaster and spread the weight of the object over the back of the plaster. Loosen the screw slightly to support the object.\nMetal toggle bolts also..

Continue Reading
Showing 231 to 240 of 10000 (1000 Pages)