Home and Garden

Refine Search

What are the advantages and disadvantages of in-floor water heating systems?

With forced-air systems, hot air enters the room from vents, rises to the ceiling and cools. The cold air then falls back to the floor so the occupant’s feet remain cold. In-floor heating eliminates cold floors in the home. The water system provides a gentle heat that eliminates the stratification common with forced air systems. The in-floor system is more effective at heating the space where people live.\nThe system works by pumping hot water from a boiler through a series of pipes to warm the home. The entire floor serves as a radiator, but because the pipes are under the floor, the system..

Continue Reading

How do you replace a door?

Make a templateUse the door being replaced to help mark the new door for cuts and ensure that it fits the space properly. Remove the doorknob on the old door, and gently set it on top of the new door. Use a pencil to mark areas to be trimmed. Also, use the old door to mark where the hinges must be installed on the new door. Prepare the doorUsing a circular saw, trim the new door along the marks you made. Sand down any rough edges. Use a hammer and chisel to remove a layer of wood for the hinges. Skipping this step creates a door that is not flush with the door frame. Predrill holes for the hin..

Continue Reading

Does glassware go on the top rack when loading a Bosch dishwasher?

Bosch recommends scraping solid food from pans, dishes and plates prior to loading into the dishwasher. According to the Bosch manual for dishwasher models SHE44C, SHE46C and SHE56C, users should load dishwashers to ensure maximum coverage of dirty surfaces.\nIf a Bosch dishwasher has an exposed heating element, plastic items must be loaded into the top rack. Dishwasher-safe plastics may be loaded into both top and bottom racks of Bosch 800 Plus dishwashers and other washers with concealed heating elements.

Continue Reading

What is a brush hog brush cutter?

Unlike regular lawn mowers, the blades of a brush hog are attached by hinges, which allows them to bounce up and accommodate obstacles such as rocks or stumps. These blades are heavy, so the outward centrifugal force is greater than the force of the brush coming in. In addition, the blades are thicker, rather dull and shaped like a wedge, which makes cutting thick brush easier. Brush hogs are powered by connecting to a drive shaft from the back of the tractor known as a power take-off.

Continue Reading

How do you paint thermofoil cabinets?

First, prepare the surface to be painted. Remove dirt, stains or debris using a damp rag, warm water and homemade detergent. Start sanding the surface of the cabinets only after they are completely dry. Wipe all the dust resulting from sanding using a damp piece of cloth.\nNext, ensure that you work in a well-ventilated room and wear protective clothing such as gloves, goggles and a face mask. Then, add a quality bonding primer using a foam roller or a paintbrush to achieve an even coat. Apply another coat of primer, and leave it to dry.\nNow start applying latex paint using either a roller or..

Continue Reading

Are there any charts for beam sizes?

SouthernPine.com offers charts for size selections of different beam spans and loading combinations for its products. These charts are necessary for window, door and garage headers, floor girder and edge beams, and roof ridge beams. SaginawPipe.com offers a chart of its steel beam inventory that includes the size of the beam, weight per foot, section depth, flange width and flange thickness.\nAt EngineeringToolbox.com, visitors can explore a number of charts that detail the properties of HE-M steel beams, HE-A steel beams and American wide flange beams, amongst others. Other charts include spe..

Continue Reading

What do you call a baby goose?

Though multiple animals are called geese, there are other names for groups. A group of geese is called a flock or a gaggle. The group is called a skein but only if the animals are flying at that particular moment. If a skein is flying in a V-shape, it is referred to as a wedge.\nMale and female geese build their nests and raise their young together. Goslings start to imitate adult behavior, especially flying, around 2-3 months of age.

Continue Reading

Does ammonia work as a raccoon deterrent?

Common solutions for dealing with raccoons include increased lighting, loud noises and foul smells. To keep raccoons away from the trash, suggested solutions range from using tight trashcan lids, embedding radios and turning them on at night, and sprinkling dog urine. Cayenne pepper, repellent pellets and mothballs are less toxic solutions suggested for ridding basements and attics of raccoons. Motion-detecting scarecrows, sprinklers and noisemakers work well in yards and around trash areas.

Continue Reading

Where are model numbers located on a heat pump?

For Rheem heat pumps and air conditioners, the model number is located on the inside front top cover on the indoor part for split systems, while the model number for outdoor units is located on the back of the system. It is important for consumers to know where the model number is located on a heat pump so that they can troubleshoot the system more easily should a problem arise.

Continue Reading

What are some things to consider when comparing window manufacturers?

The price-value relationship is an important indicator of how manufacturers compare. There are many measures of a manufacturer’s value offering, but the three major determinants are the brand, design and quality products. A strong brand is an indicator of high value. Similarly, good design and quality materials indicate that a product is of high value. Comparing the price of windows to these three elements provides insights into the value to expect from the manufacturer given a certain price.\nWarranty is a critical factor to consider when buying windows made of fragile materials such as gla..

Continue Reading
Showing 1961 to 1970 of 10000 (1000 Pages)