Home and Garden

Refine Search

Can you stain over polyurethane?

If you want to touch up furniture with a polyurethane finish without completely refinishing the piece, you can use a polyurethane stain blend like those sold on Minwax.com. This is exactly what it sounds like: polyurethane blended with stain so that you can apply it over a polyurethane finish. A second option is to use oil-based paint, but these types of paints can mask the natural wood grain. When applying any kind of stain, windows should be kept open for ventilation.

Continue Reading

How do you use the Tower Garden by Juice Plus?

Once you transplant the seedlings to your Tower Garden, the only thing left to do is maintain the system. This involves monitoring water and pH levels, maintaining the nutrient solution for the plants and cleaning the pump filter.\nIn the Tower Garden system, a solution of water and nutrients, not soil, is the growing agent for the plants. The Tower Garden contains a 20-gallon storage tank at the bottom, which stores the nutrient solution. Inside the tank is a low-wattage pump that pushes the solution through a hose to the top of the tower. Then the solution filters all the way through the tow..

Continue Reading

Why is my grass dying?

Grass that receives too much or too little water may become prone to diseases caused by fungi and other grasses. Other types of environmental stress includes unseasonable weather, such as very cool summers, and applying too much fertilizer to the lawn. Water grass only when the weather is sunny and hot, and limit fertilizer to areas that appear damaged or dying. Adjusting the mower blade before mowing hills and slopes prevents grass from dying as a result of being cut too short.\nPet urine, gasoline, paint thinner and other chemicals can cause grass to die in the affected area. If a contaminan..

Continue Reading

What are some good homemade pest control sprays?

To make the vinegar of the four thieves insect repellent, mix 32 ounces of apple cider vinegar with 2 tablespoons each of dried sage, rosemary, lavender, thyme and mint. Pour the mixture into a glass jar with an airtight lid, and seal the jar. Shake it every day for two to three weeks. It is better to place the jar somewhere where you can see it every day, so that you don't forget to shake it. When the repellent is ready, remove the herbs, and pour the mixture into a spray bottle. When applying the mixture to the skin, dilute it in half with water.\nTo make citrus oil and cayenne pepper m..

Continue Reading

What is a rice cooker?

A typical rice cooker uses conductive heating on a metal pan inside to bring the water to a boil at 212 degrees Fahrenheit. The rice grains absorb the boiling water, growing bigger and fluffier until all of the water is gone. Once the water inside a rice cooker is all gone, its internal temperature begins to rise, causing the machine to either switch to a warming cycle or to turn off.

Continue Reading

How much does a Trane heat pump cost?

Trane's website doesn't provide exact prices for its heat pumps, but provides a rough estimate by ranking their estimated costs from one to five dollar signs. Local and state regulations can affect prices, and some units qualify for tax rebates. A professional HVAC dealer considers a number of factors about where the pump should be installed before giving an exact quote.

Continue Reading

Can the anode in a water heater be replaced?

Anode rods are typically installed on the top of the hot water heater or on a pipe on the side of the tank. The anode extends into the hot water heater and can be removed for replacement. When corrosion occurs inside a hot water heater, the anode rod corrodes before the liner of the tank. Replacing a corroded anode tube prevents the liner of the hot water heater from corroding.

Continue Reading

What do the Trane AC model numbers mean?

Trane AC model numbers denote the AC unit's furnace configuration, with a U meaning upflow and a D meaning downflow. The model number also gives information about the model's design changes, with the fifth spot in the number denoting major design changes and the eighth spot describing minor design changes. The sixth spot in a Tran AC unit's model number describes the power supply and fuel.

Continue Reading

How do you remove caulk from your hands?

The first step in removing caulk from the hands is rubbing the hands vigorously with soap and water. Three or four washings are recommended before proceeding on to the next step, which is applying the nail polish remover. It is important to apply the nail polish remover in a well-ventilated area and choose a remover that uses acetone as an active ingredient. Soaking a cotton ball in the nail polish remover and rubbing it against the caulk until it begins to loosen is a good strategy. The last step is peeling the loosened caulk off of the skin before washing the hands thoroughly with soap and w..

Continue Reading

What type of fillers should you use for asphalt cracks?

For small cracks, apply the crack filler using a caulking gun if available or pour the filler carefully into the crack. Use a putty knife to smooth out the surface. For larger cracks, fill with small, crushed, angular gravel until the crack is 2 inches deep. Pour in the cold patch asphalt repair compound, and use a metal tamper to even out the area and pour in again until the crack is filled.

Continue Reading
Showing 2931 to 2940 of 10000 (1000 Pages)