Vehicles

Refine Search

What are high-performance mufflers?

When an engine fires, it creates loud pressure waves that flow out of the car through the exhaust system. If left unimpeded, these waves produce a loud and distinctive noise that can disturb others. A muffler uses a series of baffles to reflect and break up these waves in order to reduce noise pollution, but the more baffles there are to halt these waves, the more pressure stays built up inside the exhaust system. This prevents fresh air from flowing freely into the engine's intakes and causes poor performance.\nSince the exhaust system of an engine has an effect both on its noise profile..

Continue Reading

What is the reputation of Ray Skillman Ford?

Ray Skillman Ford is also rated on Cars.com, with a 3.5 star rating based on 34 reviews. Out of 34 users, 21 recommend Ray Skillman Ford. Quality of repair and customer service were the most common complaints by customers unsatisfied with the dealership. Overall Facilities and Buying Process were categories graded very highly by the average customer.

Continue Reading

How do you do a compression test?

Consult the repair manualConsult the repair manual for your specific vehicle, and make adjustments accordingly.Warm up the engineWarm up the engine, and then turn it off.Disable the ignition systemTo disconnect the engine control unit, disconnect the wire from terminal 15, or unplug the coil packs to disable the ignition system.Insert a spark plug adapterRemove one spark plug. Read the tester kit's instructions to determine which adapter to use. Install the adapter in place of the spark plug.Attach a rubber hose to the adapterAttach the fitting on the rubber hose to the adapter. Twist the..

Continue Reading

How do you perform a transmission flush on a vehicle?

Gather a jack and jack stands, a 5-gallon bucket, a long funnel that fits into the dipstick tube, 12 quarts of transmission fluid and a wrench or screwdriver, depending on your vehicle's hose clamps. Run the vehicle's engine until it reaches the normal operating temperature, and shut it off. Jack up the front end of the vehicle, and place it on jack stands.\nRemove the hose clamps from the transmission cooling lines where they enter the radiator and slide, or twist the hoses loose. Place the hose ends into the 5-gallon bucket. Remove the transmission dipstick, and insert the funnel i..

Continue Reading

How do you install a new car light bulb?

Access the headlight bulb through the vehicle's engine compartment by opening the hood and locating the headlight. Locate and remove the power wires, which are usually attached to a plug at the bottom of the light. Remove the old bulb while holding onto the base of the headlight, and install the new one in its place. Return the holder back to its original position, and plug the wires back in.\nReplacing tail lights requires a different process. After locating the housing, unscrew it along with any other screws or knobs necessary, pull out or unscrew the bulb, and replace it with the new o..

Continue Reading

How can you tell if you need a new fuel pump?

According to Cars Direct, the most common symptoms are failure of the engine to start and stalling. Malfunctioning fuel pumps cannot hold sufficient fuel pressure to start and keep the engine running. Intermittent decreased acceleration is also attributed to a bad pump because it cannot maintain an even flow of fuel to the engine, especially when the car is under heavy load, climbing a hill or running at highway speeds.\nAutomotive fuel pumps are designed to be submerged in gas, and empty gas tanks or failing fuel filters can cause pumps to fail prematurely.\nFailed pumps cause other engine co..

Continue Reading

What are the specifications of the Mercedes-Benz Unimog?

The Unimog is a four-wheel drive and has its engine at the front. It takes 22 seconds to reach a speed of 60 miles per hour starting from rest. The truck can go at a maximum speed of 95 miles per hour. With 1 gallon of fuel, the truck can travel an approximate distance of 8 miles in cities and 16 miles on highways. The vehicle has a ground clearance of 18 inches and can hold a maximum of 63 gallons of fuel.\nThe wheelbase of the Unimog is 152 inches long, and its turning radius is 53 feet long. It has a width of 98 inches and a track width of 76 inches. It is 240 inches long and 111 inches tal..

Continue Reading

Where can you find prices for Big Tex trailers?

TruckPaper.com allows visitors to its website to search for Big Tex trailers by price range, model year, type of neck, floor type and length. Visitors who click on pictures of Big Tex trailers on the website receive additional information such as condition, wheel types and additional included equipment.\nEquipmentTraderOnline.com allows visitors to search for Big Tex trailers by location from their ZIP codes, hours logged on the trailers and price range. Visitors to the website can also choose to view Big Tex trailers from dealers who are offering financing and trailers with discounted Interne..

Continue Reading

What are some Toyota dealers in Buena Park, California?

Toyota dealerships and their addresses are revealed by searching on the BuyAToyota.com website for dealerships near Buena Park, California.\nAutoNation Toyota, the local Toyota dealership in Buena Park, is open seven days a week, opening at 9:00 or 10:00 a.m. and closing at 9:00 p.m. The dealership sells a mix of new, used and certified pre-owned vehicles. The dealership offers pre-approved financing, and individuals can apply for financing on the AutoNation Toyota website under the Finance menu. Trade-in vehicles are also accepted.

Continue Reading

How do you fix a Toyota seatbelt?

The retractor cover is located under the seat belt, and it looks like a door. Take the mounting screws out of it to remove the cover. Take out the retractor mounting bolt using adjustable pliers to remove the adjuster cover. Turn the lower lap belt mounting bolt clockwise with adjustable pliers to loosen it and remove it. The bolt is usually connected near the floor of the vehicle.\nEnsure that the new retractor is located in the same place on the seat belt as the old one was. Make sure that the bottom lap belt mounting bolt is tightened firmly on the belt. After the new retractor adjustment b..

Continue Reading
Showing 3381 to 3390 of 10000 (1000 Pages)