How do I get Blu-tack marks off of walls?

Remove Blu-tack marks from walls by cleaning the area with a citrus-based stain remover and trisodium phosphate. This process takes only a few minutes. You need stain remover, a sponge, a rag, trisodium phosphate, water, a gallon container and rubber gloves.

1. Set up protection against chemicals

   Don the rubber gloves to protect your hands from the stain removers. Make sure that the area in which you are working is well-ventilated. Open a window or turn on a fan.

2. Apply the stain remover

   Purchase a stain remover that has a citrus-base. Read the label, and apply as instructed. After applying, rinse the area with clean water and a sponge.

3. Mix the trisodium phosphate solution

   Fill a container with 1 gallon of water. Measure out 5 tablespoons of trisodium phosphate. Dissolve the phosphate into the water.

4. Apply the trisodium phosphate solution

   Dip a fresh sponge into the trisodium phophate solution and apply directly to the Blu-tack mark. Allow the solution to soak into the stain for several minutes. Follow the instructions on the label of the trisodium phosphate container for recommendations.

5. Rinse the area

   After the stain fades, rinse the area with clean water. Dry the spot with a towel or rag.