How do you make log furniture?

To make log furniture, cut the logs down to the dimensions described in a woodworking plan, and scrape off the bark with a drawknife. Nail each piece together, and sand and varnish the project to finish.

1. Select a project

   Decide which type of furniture you would like to build, and find a plan to use.

2. Cut the logs

   Use a table saw to cut the logs down to the dimensions given in the plan, or use the dimensions of the area where you plan to place the piece as a guide.

3. Remove the bark

   Use a peeling spud to remove the majority of the bark from each log, and finish with a drawknife.

4. Put the pieces together

   Attach each piece with a hammer and nails. Use the log furniture plan as a guide, but build from the base up.

5. Level the item

   Ensure the furniture piece is level on the ground, and make additional cuts accordingly.

6. Sand the item

   Run a 100-grit sanding sponge over the surface of the piece to create a smooth surface. Use a smaller sanding pad of the same grit on hard-to-reach areas.

7. Varnish the piece

   Use a paintbrush to apply an oil-based varnish to the surface of the wood. Consult the instructions from the manufacturer for drying times, and apply a second coat if necessary.