Home and Garden

Refine Search

What are some pest control tips for millipedes?

Water lawns and gardens early in the morning to ensure the water evaporates quickly if millipedes are present. To seal the home, use tight-fitting window screens and doors, and seal cracks and crevices with caulking or another suitable material.\nWhen applying pesticide to mulch or leaf litter, rake the area to remove the mulch or leaves before applying the pesticide, or apply enough liquid to ensure the pesticide penetrates the material to reach the soil. Indoors, apply boric acid or another suitable powdered pesticide to suspected entrance points.\nAvoid applying powdered pesticides to damp ..

Continue Reading

What are some methods for preparing aluminum for painting?

Grit blasting is the most popular of the four methods. This approach removes corrosion and ensures good paint adhesion. To achieve the best results, use abrasives that do not etch or damage the surface, such as aluminum oxide grit.\nDegreasing aluminum removes oils and other contaminants from the surface. After cleaning the aluminum surface, use a solvent and clean pieces of cloth to wipe out the contaminants. Change both materials frequently to avoid redistributing the contaminants. Use clean water after the degreasing to ensure the materials do not leave particles on the aluminum surface.\nM..

Continue Reading

How do you make a chore chart?

Create the Excel documentOpen Excel. From the File tab, select New, then Blank Workbook. Label headings and fill in the columnsLabel the first row of columns: "Chores," "Incentives," and days of the week. Fill out each column appropriately. Incentives can be money, activities or items.Print and postPrint out the table, and attach it to a surface everyone in the household sees daily, such as the refrigerator door.

Continue Reading

How should you vent a dryer?

Home Depot suggests using rigid sheet metal about 4 inches wide as the piping for the dryer vent. Other flexible metal dryer ducts are also available to make the job easier. First, attach the piping to the dryer. Then use a 4-inch or 4 1/4-inch hole saw to drill a hole on the outside of the house for the pipe attachment. Attach the pipe to the hole. On the outside of the house, attach a hood or floating cap vent hood over the hole using a screwdriver and wood screws. Seal around the hood or floating cap vent with silicon caulk to prevent air from returning into the house.

Continue Reading

How does one set up a TIG welder?

Plug the torchConnect the torch into the machine, and plug in the gas and tube at the marked place. Ensure each hose clamps or screws into labeled connectors on the machine. If the machine has an inbuilt pedal, use it for controlling the amperage. Some machines have an optional hand- or foot-operated lever that controls the amperage during welding.Connect the grounding clampConnect your grounding clamp on a grounded object, such as a table. Use a clamp that securely clamps to any grounded object. Select the proper material on the welder to choose amperage based on the material you want to weld..

Continue Reading

What are the uses of a water filter?

Filtering water goes beyond putting water through a sieve or screen to remove particles. Depending on the type of filter used and the type of contaminant to be removed, a filter can remove particles much smaller than the holes through which the water passes. For home use, point-of-use filters are the most practical. Small systems can be installed directly at faucets and other water outlets, while larger ones can treat all water coming into the house.\nFinding the most effective and economical system for home use depends on the contaminants to be removed, making water testing a must prior to ch..

Continue Reading

How does one wire a two-way dimmer switch?

Check the light switchCheck the light switch to find out if it's a single pole switch or a two-way switch. Usually, you can see the words "off" and "on" written on a single pole switch.Locate the circuit breakerTo turn off the power, you need to find your circuit breaker. Let the rest of the family know that you are working on it and that the light should stay off. To pull out the switch from the wall box, remove the screws from the wall box.Test the switchUse a voltage tester to test the switch. Next, you need to place the black wire on the hot wire. Also, the white wire should be on the..

Continue Reading

How do you hide a bed mattress?

Measure the mattressIt will be nearly impossible to hide the mattress without knowing its measurements. The first step should be to find the length of the mattress so you know exactly where it fits. You should measure the height of the mattress and the height of the area that you will move the mattress into. These measurements ensure that if someone sleeps in the spot where the mattress is hidden, he will have enough room to stand up.Find a location in your houseLook around your house for areas that are about the same size as your mattress. You may have to empty a closet or do some constructio..

Continue Reading

How do animal control workers humanely remove raccoons?

Raccoons usually inhabit human dwellings to feed, to den and give birth and raise their young ones. They may nest in chimneys, in attics, under the floor and between the walls. Depending on the laws of the state, animal control companies may remove the raccoons by trapping them using a sturdy trap made from steel or a solid wall. If the raccoon is healthy, the wildlife control company may relocate it to the wild.\nBefore releasing to the wild, the raccoon undergoes a rabies test, and if it is infected, the wildlife control company may need to euthanize the animal as mandated by the law of the..

Continue Reading

How do you build your own garage?

The first step in building a garage is to create a plan. Plan the garage's layout, shape, size and look. Make sure you list all the materials you need and determine the timetable and budget. Find out how big your garage can be according to city ordinances. Visit your city's website to learn more about plan requirements, permits and special restrictions, as the garage must meet the requirements of your local municipality.\nMeasure your lot, create a site plan, and use the plan to get a permit. Get a bill of materials to order the materials you need to construct the garage. Stores such..

Continue Reading
Showing 911 to 920 of 10000 (1000 Pages)