Home and Garden

Refine Search

What are some brands of small man lifts?

Genie Lift manufactures telescoping and articulating boom lifts on wheeled bases. Trailer-mounted boom lifts have a Z-boom and automatic leveling system. These units are lightweight, and users can operate them on lawns and gymnasium floors. Genie also manufactures scissor lifts with smooth wheels and all-terrain wheels for different applications.\nJLG manufactures similar models. The company's product line also includes compact crawler booms. These units move on self-propelled tracks and use stationary outriggers when set up for work. Models range from 2 feet 7 inches in width to 3 feet 3..

Continue Reading

What are some tips for repairing your own outdoor furniture?

Mesh slings on aluminum patio chairs are often replaceable. To replace the sling, measure the length and width of the sling and shop for a replacement that fits the chair. To remove the old sling, cut it down the center with a utility knife, remove the end caps and slide the sling pieces off the supports. Frame parts for metal chairs and tables are also often available. The internet is a good resource for parts, notes Bankrate.com.Strapping on patio chairs is also often replaceable. It is available through a variety of online and brick-and-mortar sources.Rust on metal furniture is not only uns..

Continue Reading

How do I remove iron-on hemming tape?

Iron-on hemming tape, or fusible webbing, is a convenient way to hem clothing without sewing. It bonds two pieces of fabric together when heat is applied, and weakens when the same amount of heat is reapplied, so it can be adjusted if necessary.\nIf you need to adjust the placement of the fabric on the hem, you must work quickly. As the iron-on hemming tape cools, it becomes less sticky, and needs to be reheated to bond with the fabric.\nIf the hemming tape comes directly into contact with the hot iron, clean it off after the iron has cooled using acetone nail polish remover to gently rub the ..

Continue Reading

How do you find a one-row planter for a 3-point hitch?

Cole Planter's 12 MX Multiflex works as a planter or fertilizer. Its cast iron presswheel firms the seedbed while leaving the soil loose over the seeds. It comes with four seed plates and gears for different spacing and seed types. Uniform planting and fast germination are promoted by the unit's deep V seed opener. The Multiflex's separate fertilizer hopper and variable controls allow it to accurately spread 34 to 650 pounds of fertilizer per acre.\nJohn Deere manufactures several different types of three-point hitch one-row planters. Many of its units are produced for planting ..

Continue Reading

What would cause a central heater to blow cold air?

The following are the three common reasons why a central heater blows cold air and how to troubleshoot and fix the issue.Blown out pilot lightA pilot light is a small flame that is constantly lit within a furnace and is on standby to light up the furnace when the homeowner turns on the heater. Follow the instructions that came with the heater's manual in relighting the pilot light. If the pilot light refuses to light up, check if the gas valve is set on "On" or if the pilot light needs cleaning.Overheated furnaceAn overheated furnace also causes cold instead of warm air to come out of the..

Continue Reading

Where can you find replacement parts for a microwave that does not heat?

RepairClinic offers comprehensive guides to help customers troubleshoot many common microwave heating issues, and the company sells parts to help address the problems. Shoppers benefit from a 365-day repair policy and useful how-to videos that help simplify installation of key microwave components, and RepairClinic offers a toll-free number for assistance during regular business hours.\nShoppers who turn to AppliancePartsPros.com also get an any-part, any-reason, 365-day return policy on all purchased items, and the company boasts fast shipping on many in-stock items. Like RepairClinic, Applia..

Continue Reading

What is a heat pump used for?

A heat pump with an inversion valve is simple to switch back and forth between heating and cooling. In a traditional layout, the interior space is serviced by a furnace for heat and an evaporator/condenser combination unit for air conditioning. Using one unit for both functions saves money up front as well as over the life of the unit, thanks to the quicker depreciation time frame.\nA heat pump does not make an economical system if heating is the only desired application. Water and condensation boilers offer significantly higher degrees of efficiency. Heat pumps can use water, air or the groun..

Continue Reading

How do you troubleshoot a clothes dryer that keeps turning off?

Common dryer parts that fail include:Drive motorThe drive motor controls both the blower wheel and the drum, so a bound wheel or clogged blower can be a symptom of a bad drive motor.Drum roller or axleThe drum utilizes rollers to spin, so a drum that stops mid-cycle may not be able to spin freely because of worn rollers or axles.Drum slides or glidesThe drum rotates on plastic slides and glides, which can wear down, causing the drum to stop spinning until they are replaced.Drum bearings and support bearingsThe bearings on the drum rollers need to function properly for the drum to spin freely, ..

Continue Reading

What are some equivalents to the G13A battery?

The G13A battery is a 1.5-volt, alkaline button-cell battery intended for general use in watches, calculators and medical devices. It is not rechargeable and measures 11.6 millimeters in diameter and is 5.4 millimeters thick. It is a less-expensive alternative to a silver oxide battery and provides high capacity and long usage. Silver oxide alternatives are high-drain and may carry the same numeric designations as their alkaline counterparts or a RW22, RW82, Timex J or 357 label.

Continue Reading

How do you replace the blade on a Delta miter saw?

Use the following steps to replace a blade on a Delta miter saw.Remove the guards around the blade.Remove the screws around the plastic guards that sit in front of the blade.Unscrew the bolt that holds the blade.Hold the bolt in place on one side with an Allen wrench, and unscrew the bolt on the other side with a wrench.Insert the new blade and put the saw back together.After removing the old blade, insert the new blade and then fasten the bolt and guards back into place.

Continue Reading
Showing 941 to 950 of 10000 (1000 Pages)