Vehicles

Refine Search

How do you find parts at Pull-A-Part auto salvage?

The instructions below demonstrate how to locate parts at a Pull-A-Part auto salvage location by using their website. The website allows an individual to locate parts that are in stock and read for purchase at a Pull-A-Part auto salvage location near their home.Visit the Pull-A-Part websiteVisit the Pull-A-Part website to begin searching for available inventory.Select a locationUse the drop-down box in the "Check Inventory" section to display available location options. Select a location by using the scroll bar and left-clicking the desired location.Select vehicle makeIn the second drop-down b..

Continue Reading

What are the specs for transmission fluid in a Hyundai?

Hyundai vehicles have used a number of different automatic transmission fluid types, but most recent vehicles as of 2015 were designed to use SP4 type fluids. These fluids are also used in modern Mitsubishi and Kia vehicles as well. Older vehicles may use earlier grades of SP fluids such as SP3 or SP2, while a different formulation known as ATF+4 was also used in some older vehicles.\nContinuously variable and dual clutch transmissions require different types of transmission fluid than conventional automatics. This is because CVT designs use a pair of belt-driven pulleys to generate different ..

Continue Reading

How much do ATV batteries usually cost online?

Amazon.com also has a $100 YTX9-BS 9BS Lithium Ion battery with 12 volts and 300 Cold Cranking Amps. This version features a lower volume and weight, requires no maintenance for a year and is better for the environment. The life cycle reaches 2,000 cycles, which is significantly longer than the typical 150-300 cycles for other batteries.

Continue Reading

What are some common issues with car air conditioning systems?

If the air coming out of the vents is cold but there is a reduction in the airflow, it can be a sign of blockage around the air intake. The compressor unit has to breathe in order to generate proper airflow. Dirt, grime and debris sometimes clog the compressor, which requires periodic cleaning.\nWhen there is good airflow from the vents but the air is not cold, this can be indicative of a low level of refrigerant in the system. Adding refrigerant is a remedy for this problem, but if the cause is a leak in one of the refrigerant lines, the fix is not permanent, and it may require professional s..

Continue Reading

What are some features of the Chrysler 300C convertible?

The 300C gets 31 miles-per-gallon on the highway and features four-wheel independent suspension. With Sport Mode activated, acceleration, shifting and steering become more responsive for improved sports car performance and handling. Rear-wheel drive is standard, and an advanced all-wheel-drive system is available.\nThe 7-inch digital Driver Information Display sits directly in front of the driver in the center of the instrument panel. It is fully customizable and displays a range of data, including navigation, system alerts, current audio selection and performance information. In the center of..

Continue Reading

What is the size of an oil drum?

One barrel of oil is used to make 19 gallons of gasoline, 12 gallons of diesel fuel, four gallons of jet fuel and two gallons of liquefied petroleum gases in the United States. In California, more than 51 percent of a crude oil barrel goes to gasoline, 15 percent is made into distillate fuel oil and more than 12 percent is made into jet fuel.

Continue Reading

How do you replace the bed of a Ford F350 pickup truck?

The tools needed for this task include a ratchet with assorted sockets and extensions, a Phillips and flat head screwdriver, a Torx Plus socket, a heavy hammer or small sledge hammer, protective goggles and an angle grinder. You also need a post lift, engine hoist or three helpers. Replacing a truck bed is a difficult task and should not be attempted by a novice mechanic. Since most old Ford F350 beds are rusted, not all of the bed bolts are likely to come out using a Torx Plus socket. Use an angle grinder to grind down the bolt heads and cut a square around them to enable removal of the old b..

Continue Reading

What is a CNG conversion kit?

The main advantage of CNG conversion is cost. As of 2015, CNG fuel is much cheaper than gasoline at 79 cents to $1.50 per gallon equivalent of fuel. That cost saving is offset against the initial cost of purchasing and installing the kit, so CNG conversions are most suited to drivers with high annual mileages. Some states provide tax credits or rebates for CNG conversion, lowering the up-front cost. CNG powered vehicles are also permitted to use High Occupancy Vehicle lanes in many states.\nAvailability of fuel is a significant factor in the decision to fit a CNG kit. CNG is only available at ..

Continue Reading

How do you install a new headlight?

Open the engine compartment hood, and locate the bulb holder at the back of the headlight. Using a paper towel, remove the headlight bulb or unplug the electrical connector. Remove the trim or grill to gain access to screws that hold the headlight housing in place, turn the screws counterclockwise, and pull out the headlight. Unfasten the retainers to remove the headlight if necessary.\nPurchase a new headlight of the same size and type as the damaged one from your auto supplies stores. Mount the retainers or fasten screws to hold the new headlight in place. Be sure to place it right side up. ..

Continue Reading

What weight of oil should be used in an oil change?

The owner’s manual may also recommend different motor oil viscosities for different conditions. Common viscosities for motor oil, as of 2015, include 5W-30, 10W-30 and 5W-40. Many automakers require that car owners use the recommended oil or risk voiding their warranties, since using a heavier-weight oil than recommended or using synthetic oil that is not recommended for the car can cause engine damage.

Continue Reading
Showing 8721 to 8730 of 10000 (1000 Pages)