How do you take off window tint?

To take off window tint, clean the window tint, spray ammonia inside the window to loosen the tint and then peel the tint from the window with a blade. Next, use steel wool pads and ammonia to remove adhesives from the window, and then clean the window with a cleaner and a paper towel.

1. Clean the window, and loosen the tint

   Use a glass cleaner and a towel to remove any dirt from the window, and eliminate any material that may hinder removing the tint. Cover the window with a large plastic bag, apply ammonia inside the window to make it easier to remove the tint, and then leave the window tint in the sun for a few minutes. Be sure to keep the plastic bag over the ammonia to avoid drying.

2. Remove the tint

   Using a razor blade, peel off the tint slowly to remove it in a single piece. Be sure to begin peeling the film from a corner. Apply soapy water on the window tint, then use a another blade to eliminate any debris from the window if needed.

3. Clear adhesives

   Using ammonia and steel wool pads, scrub the window gently to eliminate adhesives. Pour a cleaner on the window, and use a paper towel to clean it. If necessary, apply WD-40 on the window, and clear any excess flue with a steel wool pad and a paper towel to eliminate the window tint.